Fuel-Oil  >  Fuel Bowers

950 Litre U.N. Approved Bunded Site Fuel Bowser

950 Litre U.N. Approved Bunded Site Fuel Bowser  Ref: BOB950Site
CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and 'A' frame drawbar.
AXLE/SUSPENSION Single solid beam axle welded to chassis and fitted with 2 No. 4 stud unbraked hubs.
WHEELS AND TYRES 2 No 185x13x6 ply commercial van tyres fitted to 4 stud 5½ "pcd rims.
COUPLING 2" forged solid ring eye.
ANCILLARY EQUIPMENT Rear support stand, front sliding prop stand.
OUTER BUND TANK Cylindrical in section with removable top section for tank access.
Rear access door fitted with stainless steel hinge and fully lockable.
Bund contains 110% to hinge line.
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene.
2" filler cap and chain. 1" vent valve, top mounted ½"
BSP suction and return connections. Gate valve in base of tank, to
pump. 1/2" pressure relief valve in tank top.
PUMP K1 Semi-rotary hand pump c/w 15' of 1" fuel hose, trigger nozzle and
stowed on bracket. In-line 'Y' strainer.
FINISH Primer and two top coats, single British Standard colour.

DIMENSIONS Approximately :-
Width 1.448m (57") Gross Weight 1450kg
Length 3.022m (119")
Height 1.371m (54") Unladen Weight 450kg
 


Ex. Vat Inc. VAT
£2,002.56 £2,302.94 VAT at 15%

 

  



950 Litre U.N. Approved Bunded Highway Bowser

950 Litre U.N. Approved Bunded Highway Bowser  Ref: BOB950High
CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and 'A' frame drawbar.
AXLE/SUSPENSION Single Avonride torsion beam axle and fitted with 200 x 50 Auto reverse brakes on 4 stud 5 ½"pcd hubs
WHEELS AND TYRES 2 No 185 x 13 x 6 ply radial tyres fitted to 4 stud 5 ½" pcd rims.
COUPLING Knott 2000kg posibrake over run auto reverse c/w spring assisted handbrake lever, breakaway cable & 40mm ring eye or 50mm ball.
ANCILLARY EQUIPMENT Moulded mudguards, rear support stand,telescopic
front jockey wheel, full road lighting c/w 7 pin plug.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of inner tank. 4 lifting eyes & fork truck sockets.
PUMP K1 semi rotary hand pump c/w in line 'Y' strainer15' of hose & trigger nozzle
INNER FUEL TANK Constructed from translucent heavy duty polyethylene with a capacity of 980 Litres. 2" filler with cap & chain. 1" vent valve, ½" top mounted suction & return connections. P.R.V. in tank top. Bottom outlet valve .
FINISH Primer and two top coats, single British Standard colour.

DIMENSIONS Approximately :-

Width 1.498m (59") Gross Weight 1500kg
Length 3.530m (139")
Height 1.524m (60") Unladen Weight 476kg
 


Ex. Vat Inc. VAT
£2,448.32 £2,815.57 VAT at 15%

 

  



950 Litre UN/IBC Static Bunded Fuel Tank

950 Litre UN/IBC Static Bunded Fuel Tank  Ref: BOB950IBCTANK
OUTER TANK Constructed from 3mm Mild Steel, cylindrical in section,
Removeable top section, 4 lifting eyes on corners tank.
Built-in fort truck pockets in base of tank.
Hinged rear access door, fully lockable.
INNER TANK Constructed from translucent heavy duty polyethylene to
Prevent rust contamination of the fuel. 2" filler with cap.
2 No. ½" BSP suction & return connections mounted in the top
Of the inner tank for generator fuel line. ½" pressure relief valve,
Manual vent valve. Fuel contents visible through tank wall.
PUMP K1 Semi-Rotary hand pump c/w in line 'Y' Strainer.
15' of 1" Hose c/w trigger nozzle stowed on a bracket.
FINISH Painted single BS colour.
DIMENSIONS Approximately: -
Width 1155mm Gross weight 1245kg
Length 2014mm
Height 1245mm Unladen weight 390kg
 


Ex. Vat Inc. VAT
£1,657.60 £1,906.24 VAT at 15%

 

  



2140 litre U.N. Approved Bunded Highway Bowser

2140 litre U.N. Approved Bunded Highway Bowser  Ref: BOB2140High
CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and 'A' frame drawbar.
AXLE/SUSPENSION Avonride 3000kg rubber torsion beam fitted with Knott 300 x 60 auto reverse brakes operated via cables and rod.
WHEELS AND TYRES 2 No 750 x 16 x 12 ply radials fitted to 5 stud rims
COUPLING 3000kg posibrake over run auto reverse c/w
Spring assisted handbrake lever, breakaway cable, 40mm ring eye.
ANCILLARY EQUIPMENT Rolled steel mudguards, rear support stand, telescopic
front jockey wheel, full road lighting c/w 7 pin plug.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene 2" filler cap and chain. 2" vent valve, top mounted ½" BSP suction and return connections. Ball valve in base of tank to pump with secondary in line. P.R.V. in tank top
PUMP K2 semi rotary hand pump fitted with 15' of 1" hose
C/w trigger nozzle and stowed on bracket. In line 'Y'
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, single British Standard colour.
DIMENSIONS Approximately :-
Width 1.828m (72") Gross Weight 2900kg
Length 3.81m (150")
Height 1.98m (78") Unladen Weight 900kg
 


Ex. Vat Inc. VAT
£3,133.76 £3,603.82 VAT at 15%

 

  



2140 Litre U.N. Approved Bunded Site Bowser

2140 Litre U.N. Approved Bunded Site Bowser  Ref: BOB2140Site
CHASSIS Constructed from 4 x 2 RSC fully welded with front
standing plate and 'A' frame drawbar.
AXLE/SUSPENSION Single solid beam axle fitted with H/D 6 stud 205mm
Pcd hubs fitted with taper roller bearings..
WHEELS AND TYRES 2 No 10.5 x 15 flotation tyres on 6 stud rims
COUPLING 2" forged welded ring eye.
ANCILLARY EQUIPMENT Telescopic screw jack on drawbar.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene
2" filler cap and chain. 2" vent valve, top mounted ½"
BSP suction and return connections. Ball valve in base
of tank to pump with secondary in line. P.R.V.
in tank top
PUMP K2 semi rotary hand pump fitted with 15' of 1" hose
C/w trigger nozzle and stowed on bracket. In line 'Y'
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, single British Standard colour.
DIMENSIONS Approximately :-
Width 1.803m (71") Gross Weight 2780kg
Length 3.378m (133")
Height 2.006m (79") Unladen Weight 700kg
 


Ex. Vat Inc. VAT
£2,446.08 £2,812.99 VAT at 15%

 

  



2140 Litre U.N. / IBC Bunded Skid Base

2140 Litre U.N. / IBC Bunded Skid Base  Ref: BOB2140IBC
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene
2" filler cap and chain. 2" vent valve, top mounted ½"
BSP suction and return connections. Ball valve in base
of tank to pump with secondary in line. P.R.V.
in tank top
PUMP K2 semi rotary hand pump fitted with 15' of 1" hose
C/w trigger nozzle and stowed on bracket. In line 'Y'
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, single British Standard colour.
DIMENSIONS Approximately :-
Width 1.535m Gross Weight 2550kg
Length 2.014
Height 1.646 Unladen Weight 623kg 


Ex. Vat Inc. VAT
£2,004.80 £2,305.52 VAT at 15%

 

  



Oil-Fuel Bowers

Oil-Fuel Bowers  Ref: TB1000
Features

1000 litre (220 gallon) capacity
U.N. approved IBC – fully complies with new regulations
Tank is seated on galvanised tubular steel frame
Rugged site specification
Anti-vandal lockable door to protect delivery equipment
Hand brake, ring hitch and flotation tyres
Fully bunded inner tank complying with current pollution prevention regulations, with a fully sealed fuel gauge and one way breather
Available in 4 colours: Red / Blue / Yellow / Green
K2 hand pump (22 litres/min) with 4m hose and trigger
 


Ex. Vat Inc. VAT
£2,120.00 £2,438.00 VAT at 15%

 

  



Oil-Fuel Bowers 1000B

Oil-Fuel Bowers 1000B  Ref: FS1000
Product Description

1000 litre (220 gallon) capacity bunded fuel storage tank, manufactured using an all steel double cylinder construction and mounted on a tough galvanised tubular steel base. Fully ADR compliant with U.N. approval, the Fuelstore 1000L can be transported full of fuel on the highway without the need for ADR driver training. This pressure tested tank is ideally suited to both site and industrial use. Features include an anti-vandal lockable door, fully sealed rotary fuel gauge, large 2" & 3" alloy filler caps, automatic suction breather, pressure relief valve and an in-line fuel filter. The tank can be lifted full of fuel, using either the lifting eyes or the forklift pockets. The unique Fuelstore pump mounting plate can cater for a wide variety of fuel delivery options.
 


Ex. Vat Inc. VAT
£1,975.00 £2,271.25 VAT at 15%

 

  



Oil-Fue-Bowsers 1500

Oil-Fue-Bowsers 1500  Ref: FS1500
Capacity 1500 litre

Features
1500 litre (330 gallon) capacity
U.N. approved IBC – fully complies with new regulations
Ideal for refuelling plant & machinery, groundcare equipment, generators and traffic control equipment
Anti-vandal lockable door to protect delivery equipment and inner tank
Features galvanised tubular steel frame with forklift pockets
Fitted to a fully sealed fuel gauge and one way breather to protect against spillage
K2 hand pump (22 litres/min) with 4m hose and trigger
Available in 4 colours: Red / Blue / Yellow / Green  


Ex. Vat Inc. VAT
£1,845.00 £2,121.75 VAT at 15%

 

  



Oil-Fuel-Bowsers 2500

Oil-Fuel-Bowsers 2500  Ref: TB2500
Features
2500 litre (550 gallon) capacity
U.N. approved IBC – fully complies with new regulations
Tank is seated on galvanised tubular steel frame
Rugged site specification
Anti-vandal lockable door to protect delivery equipment
Hand brake, ring hitch and flotation tyres
Fully bunded inner tank complying with current pollution prevention regulations, with a fully sealed fuel gauge and one way breather
Available in 4 standard colours: Red / Blue / Yellow / Green
K2 hand pump (22 litres/min) with 4m hose and trigger 


Ex. Vat Inc. VAT
£2,850.00 £3,277.50 VAT at 15%

 

  




 

Shopping Cart
 
 
 
[ View Basket ] [ Checkout ]